AccelerometerTop exit, isolated, low frequency (0.1 Hz) sensor with extended EMI performance, MIL-C-5015 connector, M6 integral mounting stud, 500 mV/g, /-5% sensitivity tolerance

AccelerometerTop exit, titanium case, miniature, underwater accelerometer with 650 psi pressure rating, case isolated, integral 10 blunt cut J6 cable, 100 mV/g, /-5% sensitivity tolerance

AccelerometerSide exit, microdot connector, low noise floor, case grounded, 100 mV/g, /-5% sensitivity tolerance

AccelerometerTop exit, isolated, low frequency (0.1 Hz) sensor with extended EMI performance, MIL-C-5015 connector, 1/4-28 integral mounting stud, 500 mV/g, /-5% sensitivity tolerance

AccelerometerSide exit, general purpose, 100 mV/g, /-5% sensitivity tolerance, MIL-C-5015 connector, case isolated

AccelerometerTop exit, isolated sensor with extended EMI performance, 4 pin M12 connector, M8 integral mounting stud, 100 mV/g, /-5% sensitivity tolerance

Accelerometer

Accelerometer

AccelerometerXY Dual-Axis High-g Inertial Sensor

AccelerometerTop exit, high temp 260 C, microdot connector, case isolated, 25 pC/g

AccelerometerSide exit, general purpose, case isolated, M12 connector, M8 captive bolt 100 mV/g, 10% sensitivity tolerance

AccelerometerLow cost embeddable accelerometer, 2-wire ICP , 1000 mV/g, TO8 housing, negative output, header pins

AccelerometerLow cost embeddable accelerometer, 2-wire ICP , 1000 mV/g, TO8 housing, positive output, integral cable

AccelerometerTop exit, general purpose, BNC connector, case isolated, 100 mV/g, /-5% sensitivity tolerance

AccelerometerPSI5 XY Dual-Axis Medium-g Inertial Sensor

AccelerometerYZ Dual-Axis High-g Inertial Sensor

AccelerometerLoRaWAN Ultrasonic Level Sensor with 10 Meter Range (1 Pk)

AccelerometerLow cost embeddable accelerometer, 2-wire ICP , 1 mV/g, low profile TO5 housing, negative output, header pins

AccelerometerSide exit, general purpose, 100 mV/g, /-5% sensitivity tolerance, M12 connector, M6 captive screw

AccelerometerTop exit, low power, low voltage sensor for wireless and battery operation, M12 connector, 1/4-28 mounting stud, 50 mV/g, /-5% sensitivity tolerance, 25 g full-scale; temp output 10.9 mV/ C (-40 C to 120 C)